19/09/2023, 08:20:28
bonjour,
Je vais vous apporter des infos supplémentaires. Je ne connais rien aux lignes de commandes.
j'ai cliqué sur shell.
dans le console j'ai coller lspci -nn | grep -i network
réponse :01:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
lspci -nnk | grep -i network -A 3
réponse:
01:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
Subsystem: Intel Corporation Dual Band Wireless AC 3165 [Stone Peak 1x1] [8086:4010]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
ip a
réponse:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
link/ether c8:d3:ff:a0:eb:50 brd ff:ff:ff:ff:ff:ff
altname enp0s31f6
3: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 70:1c:e7:7f:c0:8d brd ff:ff:ff:ff:ff:ff
4: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether c8:d3:ff:a0:eb:50 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::cad3:ffff:fea0:eb50/64 scope link
valid_lft forever preferred_lft forever
5: tap101i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN group default qlen 1000
link/ether 62:df:d5:a5:b1:90 brd ff:ff:ff:ff:ff:ff
dmesg | grep firmware
réponse :
[ 14.092791] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 14.582492] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 14.582498] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 14.582540] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 14.661841] iwlwifi 0000:01:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[ 15.256083] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 16.462047] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
j'espère que ces infos peuvent vous aider. Merci encore
Je vais vous apporter des infos supplémentaires. Je ne connais rien aux lignes de commandes.
j'ai cliqué sur shell.
dans le console j'ai coller lspci -nn | grep -i network
réponse :01:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
lspci -nnk | grep -i network -A 3
réponse:
01:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
Subsystem: Intel Corporation Dual Band Wireless AC 3165 [Stone Peak 1x1] [8086:4010]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
ip a
réponse:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
link/ether c8:d3:ff:a0:eb:50 brd ff:ff:ff:ff:ff:ff
altname enp0s31f6
3: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 70:1c:e7:7f:c0:8d brd ff:ff:ff:ff:ff:ff
4: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether c8:d3:ff:a0:eb:50 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::cad3:ffff:fea0:eb50/64 scope link
valid_lft forever preferred_lft forever
5: tap101i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN group default qlen 1000
link/ether 62:df:d5:a5:b1:90 brd ff:ff:ff:ff:ff:ff
dmesg | grep firmware
réponse :
[ 14.092791] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 14.582492] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 14.582498] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 14.582540] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 14.661841] iwlwifi 0000:01:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[ 15.256083] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 16.462047] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
j'espère que ces infos peuvent vous aider. Merci encore